How to use the car GPS remote control power off function

2019/6/10 15:10:03

When the vehicle is in a state of burglary, the GPS monitoring platform may actively issue a fuel cut-off command to cut off the oil passage of the stolen vehicle under the premise of ensuring that the vehicle is in safe driving, so as to achieve the purpose of not being able to continue to start the vehicle.


The GPS monitoring platform needs to input the platform account password for the power-off command. The information replied by the terminal should be viewed in the command record of the device.

GPS remote control power

Cut off the oil and electricity


1. Use the power off function, please make sure that the ACC line is properly connected;

2. In order to ensure the safety of the vehicle and the passengers, the terminal only performs the fuel-off operation when the GPS is in the effective positioning state and the vehicle speed is less than 20KM/H or when the vehicle is stationary. If the above conditions are not met, the terminal will delay the execution of the oil cut-off until the oil cut-off is satisfied.


Recovery of oil and gas


When the robbery is released, the monitoring platform will manually issue a recovery oil and electricity command, and the terminal will perform the recovery of the oil and electricity operation, and the vehicle will continue to drive.


The monitoring platform also needs to input the platform account password when issuing the oil and gas command. The information replied by the terminal should be viewed in the command record of the device.