How to install a GPS vehicle tracking system

2020/2/24 10:18:58

You may need to install a tracking system on your vehicle for a number of reasons. In addition to locating your own vehicle, you can also prevent it from being stolen. For fleet management, GPS functions are used more, such as monitoring drivers and their driving skills and habits. In addition, GPS is also an essential part of services such as car rental and ambulance services.

GPS  tracking system

However, no matter how you use the GPS tracking device, make it work and easy to install. After installation, the tracking device will be connected to the Advanced Global Positioning System (GPS) and accurately provide the real-time geographic location of the car. Provide direction, movement, speed and location information remotely. In addition, you can also set a geo-fence, and the GPS will alert you when the vehicle moves in a different direction than planned.

GPS  tracking system

Installation process of a GPS tracking system:

Step 1:

Before you prepare to install GPS, you must first find a power supply for GPS. There are usually two ways to power GPS. First, use a specially configured battery for power supply. 2. Connect the vehicle's power transmission terminal to power it. However, using the vehicle battery to power the GPS has certain operating difficulties, and it is necessary to ask a professional to operate it. So, using a GPS-configured power supply makes the installation easy and simple, and we can all do it by hand.

Step 2:

After installing the GPS power. Put the GPS device in a safety box. Select the area where the device is to be placed. It can be installed inside or outside the car, but in order to prevent the GPS signal from being affected, it is best to install it on the bottom of the car and place it in a more concealed location that is not easily found.

GPS  tracking system

third step:

The next step is to test our installed equipment. After placing the safety box in a safe concealed area of the car, remove it temporarily. Make a note of your current speed, location and time of parking. Then, check that the box is safely placed in the place. After the test drive, use your computer or phone to calculate the data information that the GPS tracking device has just transmitted. Compare the data with the annotations you manually collected. If both data match, you have successfully installed a GPS device.